| ASTRO Bare Surface Graffiti RemoverTrade Name ASTRO BSGR |
||||
|
||||
|
A solvent based graffiti remover designed for use on porous masonry surface. Removes aerosol and marker pen graffiti Gelled for ease of application No residual graffiti shadowing Water washable .
|
![]() |
|||
|
Description Astro BSGR has been designed to remove graffiti from brick, concrete and stone, though it can be equally effective on other substrates. As Astro BSGR is a solvent based cleaner it is not suitable for use on previously painted surfaces or surfaces that may be damaged by strong solvents. If you are unsure we recommend that you do a small trial application to assess the products suitability.If you are in any doubt as to the suitability of the product contact Astroflame.
| ||||
| Packing Available in 5 or 20 litre containers.
|
||||
| To Order & Specify To Order & Specify: Quantity / Trade name / Product ref
|
||||
| Fire Test or Assessment Reports BS476 Part 20: 1987
|
||||
| Health and Safety Contains Dicloromethane and Methanol. See separate Health & Safety (COSHH) sheet prior to use.
|
||||
|
Application Apply Astro BSGR to the graffiti affected area using a brush. The product is gelled to assist application onto vertical surfaces. Leave for 15-30 mins then test a small area to see if it has dissolved the graffiti, if not then leave for a further 15 mins. Rinse off thoroughly with cold water, preferably using a pressure washer. If any shadowing remains allow surface to dry and repeat application of BSGR to those areas. Clean all equipment with water immediately after use. Coverage - approximately 10 square meters per litre depending on porosity of surface. Read the Health & Safety (COSHH) sheet before use. |
||||
|
Related Documents |
||||
|
As part of our policy of ongoing improvements,
we reserve the right to modify, alter or change product specifications
without giving notice. Product illustrations are representations only.
All information contained in this document is provided for guidance
only, and as ASTROFLAME FIRESEALS LTD has no control over the installation
methods of the products, or of the prevailing site conditions, no warranties
expressed or implied are intended to be given as to the actual performance
of the products mentioned or referred to, and no liability whatsoever
will be accepted for any loss, damage or injury arising from the use
of the information given of products mentioned or referred to herein.
The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product in its intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. ASTROflame (Fireseals) Ltd, disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice. |
||||
![]() |
|
|||