Passive fire protection products from ASTROflame
 Installation Sheet
Click icon below Click icon below Click icon below Click icon below Click icon below Click icon below Click icon below Click icon below
Home Safety Data Sheets Installation Sheet Index Fire Tests Index Enquiry Form Contact Details Search Our Sites Online Orders and Quotes

Acoustic Vent Sleeve

Trade Names:
Jump to installation instructions ASTRO ACOUSTIC VENT SLEEVE

 

Introduction

The purpose of this document is to give guidance to approved contractors and suppliers who are engaged in the fire stopping of service penetrations in fire rated structures using the Astro Acoustic Vent Sleeve

All service holes through ceilings must be fire stopped to prevent the passage of fire, smoke and hot gases.

Prevent the spread of fire, smoke and hot gases through a building by containing it in the compartment of origin.

Maintain the integrity of escape routes from a building.

Reduce loss or damage to property from the effect of fire and smoke.

Maintain pressure differential between compartments and ventilation channels.

 

The Astro Acoustic Vent Sleeve

The Astro Acoustic Vent Sleeve has been developed to provide maximum protection for holes created by the introduction of the most popular sizes of polymeric recessed ceiling fans and vents with minimal installation time.

In a fire situation, the sleeve expands internally to crush the spigot of the fan / vent and create an effective barrier against both heat and flames. Unlike other “Intumescent” materials the Astro Acoustic Vent Sleeve do not need additional support and will only expand inwards.

 

Installation

Step One

Use OD of sleeve as a template and cut a hole in ceiling to provide a snug fit

 

 

 

 

Step Two

* Place sleeve and spigot extension, if required, onto the fan / vent spigot.

* The spigot extension is not required unless the spigot length of the fan / ventis not long enough to attach to the hose or rigid ducting with the sleeve fitted. The spigot extension can be shortened for “tight” ceiling voids.

 

 

Step Three

Attach flexible hose to spigot.

 

 

 

 

Step Four

Ease the fan and sleeve into the ceiling cut out and locate with rigid ducting if required. Attach fan / vent to ceiling in the normal way.

 

Compliance

Astro Acoustic Vent Sleeves are manufactured in the EU, meeting the highest quality standard in compliance with ISO EN 9001:2000 . For fire test certification contact Astroflame Fireseals technical department.

Fire Test and Assessment Reports

BS Standard 476 part 21 30 & 60 minute ratings.

Fire Tests

Tested to BS 476 for 2 hours

Availability

Available in singles or boxes of 10

Item
Diameter
Product Ref
Cut out Required
Acoustic vent sleeve
80
AFAVS80
110mm
Acoustic vent sleeve
100
AFAVS100
127mm

 

Storage and disposal

For long term storage and ease of installation, it is recommended that the product should be stored indoors. No shelf life is given as this product will not deteriorate in storage.

For additional testing, certification or technical information please contact ASTROFLAME FIRESEALS LTD.

Issue 10/06

 
As part of our policy of ongoing improvements, we reserve the right to modify, alter or change product specifications without giving notice. Product illustrations are representations only. All information contained in this document is provided for guidance only, and as ASTROFLAME FIRESEALS LTD has no control over the installation methods of the products, or of the prevailing site conditions, no warranties expressed or implied are intended to be given as to the actual performance of the products mentioned or referred to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use of the information given of products mentioned or referred to herein.

The above information to the best of our knowledge is true and accurate and based upon current test data and is supplied for your guidance only. Customers should satisfy themselves to the suitability of the product in its intended use and no guarantee is given or implied since the conditions of actual use are beyond our control. ASTROflame (Fireseals) Ltd, disclaim any liability for loss, damage or other expense arising from the use of information, data or products mentioned or referred to and reserve the right to change any details or specifications without notice.

Astroflame (Fire Seals) Ltd. Intumescent House
Unit 8, The IO Centre, Stephenson Road, Segensworth
FAREHAM, ENGLAND PO15 5RU
tel 0800 023 2482
(01329 844500)
fax 0800 023 2483
(01329 844600)
intl
tel +44 1329 844500
fax +44 1329 844600