Passive fire protection products from ASTROflame
 Installation Sheet
Click icon below Click icon below Click icon below Click icon below Click icon below Click icon below Click icon below Click icon below
Home Safety Data Sheets Installation Sheet Index Fire Tests Index Enquiry Form Contact Details Search Our Sites Online Orders and Quotes

Intumescent Cable Port

Trade Names: Astro FRA Cable Port
Jump to installation instructions

 

Introduction

The purpose of this document is to give guidance to approved contractors and suppliers who are engaged in the fire stopping of service penetrations in fire rated structures using the Astro FRA Cable Port

All service holes through ceilings must be fire stopped to prevent the passage of fire, smoke and hot gases.

Prevent the spread of fire, smoke and hot gases through a building by containing it in the compartment of origin.

Maintain the integrity of escape routes from a building.

Reduce loss or damage to property from the effect of fire and smoke.

Maintain pressure differential between compartments and ventilation channels.

 

The Astro FRA Cable Port

The Astro FRA Cable Port has been developed to provide maximum protection for cable penetrations and ease of fitting. In a fire situation, the intumescent plugs within the cable port expand and fill all of the available space with a fire resistant highly insulating char.

The fire is unable to penetrate the hole and the char is able to give the additional insulation protection to the wall void by reducing the chance of heat build up and the ignition of flammable structural members. The penetration in the wall also provides a path for air, thus creating heat loss and drafts, the fitting of a Firefly cable port reduces this problem.

 

Installation

Step One
Using a 60mm diameter hole saw, make a hole in opposite sides of the wall.

Step Two
Fit a cable port in to each side of the wall securing with sealant if required.

Step Three
Remove end caps and pass cables through port, replacing caps to create a tight seal around cables.

 

Sizes


The cable port is designed for single or multiple cables up to a maximum of 10 cables depending upon cable diameter.

Compliance

Astro FRA Cable Ports are manufactured in the EU, meeting the highest quality standard in compliance with ISO EN 9001:2000 .

 

Fire Tests

ASTRO FRA Cable Ports have been tested to BS476 part 20 in an un-insulated plasterboard wall construction for 120 minutes without failure in either insulation or integrity.

Acoustically tested by Sound Research Laboratories to both BS EN150 140-3: 1995 & BS 2750 Part 3 1995.

For fire test certification contact Astroflame Fireseals technical department.

Availability

Available in singles or boxes of 10

Storage and disposal

For long term storage and ease of installation, it is recommended that the product should be stored indoors. No shelf life is given as this product will not deteriorate in storage.

For additional testing, certification or technical information please contact ASTROFLAME FIRESEALS LTD.

For additional information please contact Astroflame Fireseals Ltd.


Issue 06/07


Astroflame (Fire Seals) Ltd. Intumescent House
Unit 8, The IO Centre, Stephenson Road, Segensworth
FAREHAM, ENGLAND PO15 5RU
tel 0800 023 2482
(01329 844500)
fax 0800 023 2483
(01329 844600)
intl
tel +44 1329 844500
fax +44 1329 844600