Raven Products Smoke Seals

DOOR BOTTOM SMOKE SEALS

Raven RP8Si : Raven RP38Si : Raven RP70Si : Raven RP99Si

Raven Seals have been designed to accomodate a variety of duty levels, classified on this web site as light, medium and heavy.

L Light Duty seals include those typically used in resedential applications or light traffic areas.

M Medium Duty seals are used in commercial applications such as office spaces, shops, commercial accomodation or medium traffice areas.

H Heavy Duty seals are designed for areas with a high level of use such as public places such as hospitals, airports, factories, shopping centres or areas with a large flow through of pedestrian and wheeled traffic.

A hot smoke automatic door bottom seal, with an extruded silicon sealing component, that conforms to the 200 degrees Celsius requirement of BCA c3.4.

RP8Si is spring loaded to lift clear of the floor as soon as the door leaf is opened by a few millimetres.

Mounted into a 15mm x 34mm groove that has been morticed into the bottom edge of the door, it is operated automatically by pressure against the door jamb on its adjusting screw.

RP8Si has been tested for durability 1,000,000 cycles completed without failure.

Location
Single and double, butt hinged doors.

Min/Max Gap 3mm/13mm.

Seal Lengths
380mm, 600mm, 820mm, 915mm, 1070mm, 1220mm (max). Seal cut back to exact size

Standard Finish
Anodised Satin Clear or Bronze (poa).

Fixing Method
Concealed, with supporting colour matched stainless steel escutcheon plates.
Screws supplied

Seal Material
Silicon rubber (SE) (Charcoal)

Replacement Seal RP308si.

Optional
Stainless steel rounded escutcheon plate RP8cp2(clear) RP8bp2(bronze).

Escutcheon plate dimensions
Rounded: 22mm wide, 57mm high, (22mm dia router bit) 1.2mm thick
Rectangular: 22mm wide, 60mm high, 1.2mm thick

RP38Si

A medium temperature smoke door bottom seal, with an extruded silcon sealing component, that conforms to the 200 degrees Celsius requirement of BCA spec c3.4. It is a heavy duty automatic door bottom seal which is spring loaded to lift clear of the floor as soon as the door leaf is opened by a few millimetres.

The seal is operated automatically by pressure against the door jamb on the adjusting screw. It seals when the door closes and retracts automatically when the door is opened. It is self levelling.

Symbol Guide

Location
Single or double, butt hinged doors., minimum thickness 45mm.

Min/Max Gap upto 13mm.

Seal Lengths
450mm, 610mm, 915mm, 1067mm, 1220mm, 1500mm seals cut back to exact size, longer sizes p.o.a.

RP38Si has been fire tested to AS1530.4 AS/NZS1905.1. It can be face mounted or semi morticed in proprietary poa.

Standard Finish
Anodised Satin Clear, (bronze or painted poa).

Fixing Method
Fully morticed, can be adjusted, escutcheon plartes provided.

Seal Material
Silicon rubber (SE) (charcoal colour)

Replacement Seal RP338si.

RP70Si

The RP70Si automatic seal is the fully morticed version of the RP38Si door seal. It is a heavy duty door bottom seal which is spring loaded to lift clear of the floor as soon as the door leaf is opened by a few millimetres.

The seal is operated automatically by pressure against the door jamb on the adjusting screw. It seals when the door closes and retracts automatically when door is opened. It is self levelling.

When using RP70si door bottom seal, the door must be a minimum of 45mm thick and of suitable construction for morticing this seal. It is reversible for left or right handed operation.

Note: For double doors, plain meeting stiles are required.

RP70Si has been tested for durability ~ 1,000,000 cycles completed without failure.

Symbol Guide

Location
Single or double, butt hinged doors., minimum thickness 45mm.

Min/Max Gap upto 13mm.

Seal Lengths
450mm, 610mm, 915mm, 1067mm, 1220mm, 1500mm seals cut back to exact size, longer sizes poa.

Standard Finish
Anodised Satin Clear, (bronze or painted poa).

Fixing Method
Fully morticed, can be adjusted, escutcheon plartes provided.

Seal Material
Silicon rubber (SE) (charcoal colour)

Replacement Seal RP338si.

RP99Si

RP99Si is a heavy duty automatic door bottom seal which is spring loaded to lift clear of the floor as soon as the door leaf is opened by a few millimetres. An acoustically designed seal for face mounted , semi morticed or fully morticed applications. It is operated automatically by pressure against the door jamb on its adjustment block. RP99Si seals when the door closes and retracts automatically when the door is opened

RP99Si has been tested for durability, 1,000,000 cycles completed without failure.

RP99Si conforms to the 200 degrees Celsius requirement of BCA c3.4 spec, for fire rated & medium smoke doors. All fitting options have been tested and approved on proprietory fire doors to 120 minutes AS1530.4 and AS/NZS2905.1.

Symbol Guide

Location
Solid core single and double broad butt hinged doors. Face fix, fully and semi morticed applications. Minimum door thickness 40mm recommended.

Min/Max Gap 1mm/19mm.

Seal Lengths
380mm, 600mm, 720mm, 820mm, 915mm, 1070mm and 1200mm. Seal cut back to exact size.

Standard Finish
Anodised Satin Clear, (bronze or painted poa).
Note: Face mount aluminium angle and all escutcheon plates included.

Fixing Method
Zinc plated, cross recess head S.T. screws of the appropriate size are supplied. Colour matched escutcheon plates included.

Seal Material
Silicon rubber (SE) (charcoal colour)

Replacement Seal RP347si.