Trade Name: ASTRO X SERIES CE PIPE COLLAR
Intumescent CE Marked Pipe Collars
CE Marked.
Certifire Approved.
Fire Resistance testing to EN 1366-3 EI30, EI60, EI90, EI120, EI240.
Pipe sizes from 32mm to 250mm.
Compatible with PP, PE, PVC-U, ABS, SAN & PVC pipes.
3 Fixing Tabs.
End Capping – Uncapped U/U and Capped U/C & C/U pipes
Description
Astro X Series CE Pipe Collars are designed and tested to seal service penetration apertures containing plastic and metallic pipes, pipes with insulation or cables, using thermoplastic composites based on graphite intumescent technology.
Developed to provide a high volume expansion and pressure seal during a fire. The X Series CE Collar offers EI120 and EI240 tested to EN1366-3, the maximum diameter being 250mm, the ultra thin design of Astro X Series collar shell gives a depth of 30mm and 40mm ensuring that they can be installed into the tightest of locations.
Astro X Series Pipe Collar can be installed on flexible wall, rigid wall, rigid floor constructions and in batt seals.
They are compatible with polypropylene (pp),polyethylene (PE) and Polyvinylchoride (PVC) pipes. X Series Collar is tested with end capping configurations that cover U/U, C/U, U/C and C/C pipes.
Astro X Series CE Pipe Collar is used around combustible pipes to form a penetration seal used to reinstate the fire resistance performance of wall and floor constructions, where they have been provided with apertures for the penetration of combustible pipe services.
Astro X Series CE Pipe Collar include an intumescent component incorporated into a mild steel case to close any gaps and joints and provide a closure of combusting pipes when heated and to prevent the passage of fire.
Astro X Series CE Pipe Collars are supplied in assembled form, without fixings. The collar is wrapped around the pipe at the soffit or both faces of walls, depending on application.
CE Marked Documents
'DoP's are Declarators of Performance
'CoC's are 'Certificates of Constancy'DoP Astro X Series Pipe Collar CoC Astro X Series Pipe Collar
Availability
The Astro X Series CE Pipe Collar range is available in standard sizes, to suit 55, 82, 110, 160 & 200 mm
diameter pipes, and includes intermediate and larger sizes.
Installation
Installation details and technical support are available from Astroflame technical department.
• Place Astro X Series CE Pipe Collar around pipe and hold in place using the Slide clip.
• Slide into place.
• Fix using Rawl bolts or heavy-duty screws, When installing in partitions use 8mm spring toggles or
straight through fixings if 2 collars are to be used.
• NO PLASTIC or COMBUSTIBLE FIXINGS MAY BE USED.
Further information on installation can be found on our (TDS) Technical Data Sheet.
Colours
Flame Red
Packing
Available to order in any quantity,
To Order & Specify
Please quote- Quantity / Trade name / Product Ref / Size
Typical wording- 10 / Astro X Series CE Pipe collar / AFPC55X/CE / 55mm
Health and Safety
The product does not present any known health hazards during or after installation. Normal good industrial and personal hygiene practices should be observed.
As part of our policy of ongoing improvements, we reserve the right to modify, alter or change product specifications without giving notice. Product illustrations are representations only. All information contained in this document is provided for guidance only, and as ASTROFLAME FIRESEALS LTD has no control over the installation methods of the products, or of the prevailing site conditions, no warranties expressed or implied are intended to be given as to the actual performance of the products mentioned or referred to, and no liability whatsoever will be accepted for any loss, damage or injury arising from the use of the information given of products mentioned or referred to herein.
The above information
to the best of our knowledge is true and accurate and based upon current
test data and is supplied for your guidance only. Customers should
satisfy themselves
to the suitability of the product in its intended use and no guarantee
is given or implied since the conditions of actual use are beyond
our control. ASTROflame (Fireseals) Ltd, disclaim any liability for
loss, damage or other expense arising from the use of information,
data or products mentioned or referred to and reserve the right to
change any details or specifications without notice.
Astroflame (Fire Seals) Ltd. Intumescent
House Unit 8, The IO Centre, Stephenson Road, Segensworth FAREHAM, ENGLAND PO15 5RU |
|
tel 0800 023 2482 (01329 844500) |
fax 0800 023 2483 (01329 844600) |
intl tel +44 1329 844500 |
fax +44 1329 844600 |
email sales@astroflame.com |
|