Fire Stop Products | Astro PFP FR Putty Seal
For in-stock items orders received before 2pm (Monday-Friday) are generally dispatched for delivery on the following working day (Monday-Friday).
Astro PFP FR Putty seal is an easy to apply fire and sound rated sealant supplied as a non-setting putty. The putty is hand workable, reusable and re-serviceable due to its non-setting properties. The putty is manufactured and supplied in different shapes and forms for different applications.
Putty Pads for sockets
When electrical sockets and switches are installed in dry lining partitions, the original fire rating of the partition is compromised. Fitting Putty Pads will reinstate the fire rating of the partition for up to 90 minutes (depending on the partition fire rating) preventing the passage of smoke, flames, sound and air through the electrical socket.
Putty Cords for fire sealing services
The putty chord is designed to seal small gaps (0-10mm wide) around service penetrations where it is difficult to use traditional intumescent sealant and backers in terms of access and maintaining correct depths of seal.
Putty Pads for water supply boxes
When tap water wall boxes are installed in dry lining partitions, the original fire rating of the partition is compromised. Fitting Putty Pads will will reinstate the fire rating of the partition for up to 90 minutes (depending on the partition fire rating) preventing the passage of smoke, flames, sound and air through the electrical socket.
|Putty Pads for sockets||Rw 67 dB|
Astro PFP FR Putty seal has been tested at BRE (UKAS accredited); according to EN ISO 140-3:1995. Single number quantities were calculated in accordance with EN ISO 717-1:1997. The test report is available upon request.
|Compound||Emission rate after 3 days||Emission rate after 4 weeks|
|TVOC||190 μg/m3||12 μg/m3|
|TSVOC||< 5 μg/m3||< 5 μg/m3|
|VOC w/o NIK||13 μg/m3||< 5 μg/m3|
|R Value||0.10||< 0.0099|
|Formaldehyde||< 3 μg/m3||< 3 μg/m3|
|Acetaldehyde||< 3 μg/m3||< 3 μg/m3|
|Carcinogenic||< 1 μg/m3||< 1 μg/m3|
|Regulation or Protocol||Conclusion|
|French VOC Regulation||A+|
|French CMR components||Pass|
|Indoor Air Comfort®||Pass|
|Indoor Air Comfort GOLD®||Pass|
|LEED v4 (outside U.S.)||Compliant|
Tested by Eurofins Product Testing; report available upon request.
|Ready for use||Silicone based putty|
|Durability/service||Class Z2 : Intended for uses in internal conditions with humidity lower than 85% RH excluding temperatures below 0°C, without exposure to rain or UV|
|Application temperature||+4 °C to +40 °C|
|Service temperature||-70 °C to +120 °C|
|Storage||Stored in temperatures between 5°C and 30°C|
|Form||Pads or cords pre-shaped to its intended use|
|AFPFPPPIS||Astro PFP FR Putty Pad Internal Single||170x170mm|
|AFPFPPPID||Astro PFP FR Putty Pad Internal Double||230x170mm|
|AFPFPPPES||Astro PFP FR Putty Pad External Single||180x130mm|
|AFPFPPPED||Astro PFP FR Putty Pad External Double||230x230mm|
|AFPFPPCO||Astro PFP FR Putty Cord||200xØ15mm|
Please contact us and quote the following information - Quantity / Product Code / Product Description / Size /
Typical wording - 10no / Astro PFP FR Putty Pad Internal Single / AFPFPPPIS / 170x170mm
We have technical representatives who provide assistance in the selection and specification of the products on this site and should be consulted for exact installation and product suitability. Ensure an early engagement with ourselves, designers, main contractor and specialist installers before any installation. Other trades and/or manufacturers may need to be consulted. For in-depth information, specification and technical advice please call our Head Office on tel 01329 844 500 or email firstname.lastname@example.org
All interested parties, designer, specifier, main contractor and specialist installers should provide access to allow the fire stopping seals to be regularly inspected and maintained, as well as records kept of such maintenance at minimum periods of 12 months, as required by the Regulatory Reform Order, and repaired if necessary. Reference should be made to ASFP TGD 17 – Code of Practice for the Installation and Inspection of Fire Stopping.
It is vital that those entrusted to design or install a fire stopping product have the necessary levels of competence to undertake the task professionally and thoroughly. The level of competency required will be commensurate with the expected complexity of the building. All designers must eliminate, reduce or control foreseeable risks that may arise during installation, construction or maintenance when preparing or modifying designs. Clients should ensure that the principal designer and principal contractor carry out their duties under CDM regulations. The ASFP foundation course in passive fire protection provides essential knowledge as part of demonstrating competency and understanding in this key fire protection specialism.
Please refer to the ETA sheet for fields of application for this product. For further information on installation requirements please refer to the socket box manufacturer data and wall specification to ensure the compatibility of this product, if in doubt please contact the technical team with services and wall specification on: tel 01329 844 500 or email email@example.com
The product does not present any known health hazards during or after installation. Normal good industrial and personal hygiene practices should be observed. For further information on health and safety requirements please contact the technical team on: tel 01329 844 500 or email firstname.lastname@example.org
Download and review the following available data sheets for this product.
For in-stock items orders received before 2pm (Monday-Friday) are generally dispatched for delivery on the following working day (Monday-Friday). All dates quoted for despatch are estimates only and are not guaranteed. We will endeavour to meet these dates but shall have no liability for any delay in despatch or delivery or any damage or loss occasioned thereby. We may deliver products pursuant to any order by instalments. If we are unable to deliver the goods for any reason,you will be contacted and you will not be obliged to pay for the goods which have not been delivered, you also have the option to cancel the goods that have been delivered, however we shall not be liable for any loss of income or profit which may have been caused by the delay or non delivery of goods.
For information about our returns policy please click here.
If you've got a question about this product or need some technical help get in touch with the Astroflame sales or technical team to discuss your requirements today. We are open Monday to Friday 8:00am to 5:30pm. You can always contact us on the following:
Web Page Last Modified: 22nd April 2021
or click "x" to close this box.